soundsation AUDES - Chorus

23
ENGLISH
AUDES DIGITAL PIANO User manual
REVERB TYPES TABLE
N.
Key Name Abbreviation on Display
1
F6 ROOM1 RM1
2
F#6
ROOM2
RM2
3
G6 ROOM3 RM3
4
G#6 HALL1 HL1
5
A6 HALL2 HL2
6
A#6 PLATE PLT
7
B6 DELAY DLY
8
C7 PAN DELAY PAN
NOTES:
1) When selecting reverb types the name is temporarily shown in full.
2) The abbreviation on the Display for the selected reverb type is shown only if the
reverb is activated (ON).
REVERB LEVEL
To adjust the Reverb level, press and hold the [FUN-
CTION] button and then press the [REVERB LEV -]
(C#6) / [REVERB LEV +] (D#6) keys to decrease/in-
crease the reverb level value as shown in the gure on
the right. During adjustment the display always shows
the current value of the reverb level. The value range
for the reverb level is 0 to 127. The default value for
the reverb level is 64.
- REVERB LEV +
C#6 D#6
FUNCTION
ACC VOLUME
13.2. Chorus
The AUDES piano has 8 selectable Chorus types with adjustable level. The default set-
ting for the Chorus eect is OFF.
CHORUS ON/OFF
To activate the “Chorus” eect, press and hold the
[FUNCTION] button and then press the [CHORUS]
key (D#3) as shown in the gure on the right. When
the Chorus is activated, the display will temporarily
show the message ON and the chorus type used will
be shown at the top right. To turn the Chorus eect
o, press and hold the [FUNCTION] button again, and
then press the [CHORUS] key (D#3). In this case the
display will temporarily show the message OFF.
REVERB CHORUS
D#3
FUNCTION
ACC VOLUME
CHORUS
ON
SOUND: 000 STYLE: 00 TRANS: 0 BEAT: 4/4 : 120
C:CR1