Level 1 (Low), Level 2, Level 3, Level 4, and Level 5 (High)
Assign the recording mode for the selected channel. Options are: Continuous,
Motion, Schedule or Disable.
Select the sensor settings for the selected channel.
Enable/disable pre-event recording. Pre-event recording is limited to 20 minutes.
Set the post event recording time duration for the specified channel.
(10~30 seconds)
Enable/disable audio recording for the specified channel.
Set the recording schedule.
Set the recording by EZRecord feature.
The EZRECORD has a higher priority than other setting values on RECORD.
User can change the setting value such as resolution, frame rate, quality and
recording type. By the setting value, the DAYS TO RECORD will change
accordingly.
To Next Page
Loading...
