Speco D8DS - Setup - CONFIG Mode

42
RECORDING
LIMIT
Enable/disable recording limit.
RECORDING
LIMIT DAYS
Set the recording limit days. (1- 90 days)
If the RECORDING LIMIT DAYS are set to 1, the data will be overwritten after 24
hours.
S.M.A.R.T
Set the alarm and beep by setting the HDD temperature limit.
Alarm will trigger alarm output.
Buzzer will trigger beeping from the internal speaker.
4-9. Setup - CONFIG Mode
In the SETUP menu, select the CONFIG tab. Then, the configuration menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control.
Figure 4.9.1. CONFIGURATION Setup Screen