90
9-1-1. Live
1. Open the installed “Speco Player” App and click button to add a remote device.
2. Enter the site name, IP or DDNS address, Network Port number (default 5445), ID(default admin) and
Password (default 1111). Then, click “Save” button.
* Note: Network Port and Web Port must be forwarded before adding a new site.
3. Select a registered device and select LIVE. Then click “CONNECT” button.
4. The app will display the selected channel(s). Double tap the channel screen to switch 1 channel display to 4,
8, 10, 16 channels split display depending on the DVR.
Notice
SPECO Player is for the DS, RS, WRS and HD series DVRs. SPECO VIEWER is not
compatible with the T Series DVR‟s (TH, TN or TL) or the PC Series DVR‟s.
To Next Page
Loading...
