72
7-7-1. System
Select System to set system and time settings.
DATE DISPLAY FORMAT: Select the date display format.
CLIENT ACCCESS: Enable/Disable remote access through network client software.
NTP SETUP: Sets whether to synchronize the time using NTP server or not.
o Primary SNTP Server: Input the NTP primary server address.
o Secondary SNTP Server: Input the NTP secondary server address.
o Time Zone: Select the time zone.
o Connection Mode: Select the connection mode to NTP time server.
SEND E-Mail SETUP: Sets whether to enable/disable e-mail sending function.
o TRANSMISSION MODE: Select the mail transmission mode (TEXT or VIDEO).
o IP NOTIFICATION: Enable/disable sending e-mail when the IP address is changed.
o MAIL BY SENSOR: Enable/disable sending e-mail reports when an alarm event is triggered.
o MAIL BY MOTION: Enable/disable sending e-mail when the motion is detected.
o MAIL BY VIDEO LOSS: Enable/disable sending e-mail when the video loss is detected.
o MAIL BY S.M.A.R.T.: Enable/disable sending e-mail reports when S.M.A.R.T. is triggered
o MAIL DVR STATUS: Enable/disable sending periodical e-mail of the system status.
o MAIL PORT: Mail port setting.
o SEURE OPTION: Select a secure mail server connection. (SSL or TLS)
o MAIL TO: Input the appropriate email address to enable sending e-mail reports
o MAIL SERVER: Input the SMTP server name as well as the user ID and password.
o MAIL FROM (Return Mail Address): Set the source e-mail address to be notified to the
destination.
USER NAME: Name the DVR
To Next Page
Loading...
