Step + Go Mode:
Press and hold or button for changing the grade value after the comma.
Press/release button or change the sign of the grade value.
The Plus sign won’t be displayed.
Press and hold buttons simultaneously starts the
Quick change mode where the grade value will be set to 0% and
then starts in front of the comma changing in 1% increments.
Note: When the grade value reaches its highest amount, the grade value switches to
the lowest value. For example, the value switches from +40% to -12%.
The laser will self-level to the required grade position after confirming
the grade change with button.
Note: The bubble symbol at the laser’s and remote’s LCD and the
laser beam will flash until the laser has been self-leveled to the
requested grade position.
Menu functions – Entering Grade
To Next Page
Loading...
Need help?
General
