Transportation/Setting-
— 05.12.2017 —
Notice! Damage to instrument!
Corrosive vapors may damage the instrument.
Place the instrument in an environment free from corrosive vapors.
Information! Measurement errors!
If the instrument is subject to vibrations and shocks, measurement errors
may occur during the measuring process.
The instrument must be installed at a vibration- and shock-free location.
Avoid mechanical impacts.
Measurement errors may result from temperature differences inside the
instrument.
Install the instrument so that it cannot heat up or cool down on one side
only.
4.2 Dimensions and weight
Name Value
Unit height 670 mm (26.3’’)
Unit width 425 mm (16.7’’)
Unit depth 330 mm (13.0’’)
Unit weight 33 kg (72.7 lbs)
To Next Page
Loading...
