Sri PXS-710D - Calibration Mode Utility; Ready Indicator

PXS-710D Section 2
42
2.5.5 CONTINUED:
Figure 2.11
Calibration Mode UTILITY
d. kVp adjustment is accomplished by the UP and DOWN buttons
located under the kVp display.
e. Time/mAs adjustment is accomplished by the UP and DOWN
buttons located under the Time Display.
f. To Prepare the Generator, press the Exposure switch’s PREP
button. A 2 second PREP display will be shown and turn GREEN
when the unit is ready to Expose. Ref Fig. 2.12
Figure 2.12
Ready Indicator