ST B-U585I-IOT02A User Manual

1 Features
• Ultra-low-power STM32U585AII6Q microcontroller based on the Arm
®
Cortex
®
‑M33 core with Arm
®
TrustZone
®
, 2 Mbytes of flash memory and 786 Kbytes of SRAM, and SMPS in UFBGA169 package
• 512‑Mbit Quad-SPI flash memory, 64‑Mbit Octo‑SPI PSRAM, 256‑Kbit I
2
C EEPROM
• USB FS, Sink and Source power, 2.5 W power capability
• 802.11 b/g/n compliant Wi‑Fi
®
module from MXCHIP
• Bluetooth
®
Low Energy from STMicroelectronics
• MEMS sensors from STMicroelectronics
– 2 digital microphones
– Relative humidity and temperature sensor
– 3-axis magnetometer
– 3D accelerometer and 3D gyroscope
– Pressure sensor, 260-1260 hPa absolute digital output barometer
– Time-of-Flight and gesture-detection sensor
• Ambient-light sensor
• STSAFE authentication and security for peripherals and IoT devices from STMicroelectronics
• 2 user LEDs
• User push-button
• Reset push-button
• Board connectors
– USB Type-C
®
– ARDUINO
®
Uno V3 expansion connectors
– Camera module expansion connector
– 2× STMod+ expansion connectors
– Pmod
™
expansion connector
• Flexible power-supply options: ST-LINK USB V
BUS
, USB connector, or external sources
• On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Comprehensive free software libraries and examples available with the STM32CubeU5 MCU Package
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
®
, MDK-ARM, and STM32CubeIDE
Note: Arm and TrustZone are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM2839
Features
UM2839 - Rev 4
page 2/54

ST B-U585I-IOT02A Specifications

General

Brand	ST
Model	B-U585I-IOT02A
Category	Computer Hardware
Language	English