ST STM8L - Revision History; Table 4. Document Revision History

Revision history AN3029
40/42 DocID16139 Rev 5
12 Revision history
Table 4. Document revision history
Date Revision Changes
09-Sep-2009 1 Initial release
16-Sep-2010 2
Updated all sections and references for medium density, medium+
density and high density devices.
Added STM8L16x devices.
Replaced V
DDIO
and V
SSIO
by V
DDx
and V
SSx
respectively.
Replaced 48-pin package by “some packages”.
Added IAR C compiler.
Section 2.1: Power supply overview: updated text.
Figure 1: added note 2; removed the + sign on the VLCD cappa.
Crystal/ceramic resonator: added reference to AN2867.
Section 3.2: Analog input: updated text.
Section 4.3.2: LSE clock: re-arranged section.
Section 5.1: Reset management overview: removed bullet
“electromagnetic susceptibility (EMS) reset (present only on STM8S
family).
Figure 7: removed EMS reset; added external reset circuit.
Section 5.2: Hardware reset implementation: added text about the
pull-down capacitor.
Table 2: Component list: updated “comment” information for ID
number 2 (battery); added ID number 5 (ceramic capacitor).
Figure 10: added external reset circuit and note 1.
Section 9.2: Compiler: updated “16 Kbytes” with “32 Kbytes” of
generated code.
Section 9.3: Firmware library: updated text explaining the workspace
and project definition files.
Section 10: Setting up the STM8 development environment:
removed introductory text.
Section 10.2: Using the tools: added EWSTM8.
07-Mar-2011 3
Figure 1: updated figure content and footnotes.
Section 2.1: Power supply overview: updated bullet points.
Section 3.1: Analog power: updated bullet point concerning V
REF+
.
Section 6.4: Decoupling: updated value of the pool capacitor to 1 µF
(instead of 100 µF).
Figure 10: updated figure content and footnotes.
Section 8: STM8 development tools: updated bullet point 5 regarding
STM8L101-EVAL.
Section 9.1: Integrated development environment: added the low-
cost ST-Link tool in the list of hardware tools supported by STVD.