Introduction ST700 Dash Display System
4
Optional functions available:
❑ Odometer and tripmeter (user–selectable Miles or Kilometres)
❑ Lap and split–time memory
❑ Corner and maximum straight speed read-out
❑ User selectable acceleration and deceleration timer and ¼ mile time
❑ Plug–in lap timing and data acquisition options
❑ White or black dial face options offering a choice of RPM scales with
optimised ranges
The ST700 Dash Display System requires a connection to the vehicle
battery supply, the engine ignition system and the various sensors fitted
to the vehicle to provide the full range of measurements.
If your ST700 Dash Display System includes the option to trigger lap
times automatically, you will also require a vehicle–mounted infrared
(IR) sensor and a track–side IR beacon.
Refer to the following section of this user guide for instructions to install
the ST700 Dash Display System.
Depending on the model you have chosen, your ST700 Dash Display
System might not include some of the features described in this user
guide.
To Next Page
Loading...