Software Manual
36
(5) The TSP100 LAN printer on the network and the paired TSP100 Bluetooth printer are listed in the
printer list.
If changing or confirming a printer's Bluetooth Settings, select a printer, and then click
[Configuration].
If multiple TSP100IIILAN printers are listed, click [Check connection] to check whether
you can communicate with the printer. The connected printer's LED (blue) will blink.
Notes:
- For a Bluetooth printer, you can only create 1 printer queue per port (device).
- When enabling the "Always enabled" setting in TSP100 Configuration Utility, [Configuration]
and [Check Connection] cannot be selected.
Go to Bluetooth setting
(Next Page)
To Next Page
Loading...
