Software Manual
37
◆Changing the TSP100III Printer's Bluetooth Settings
1) When changing the configuration of the Bluetooth printer, click [Apply].
Device Name
- The Bluetooth Device Name can use a combination of letters, characters and symbols.
- Supported characters are: “a“ - “z”, “A" - “Z”, “0“ - “9”, and Various symbols.
- A maximum of 16 characters can be used for the Bluetooth Device Name.
iOS Port Name
iOS port name is used in using iOS devices.
New Pairing Permission
If you clear the checkbox to disable "New Pairing Permission", you cannot connect from a device
other than a paired tablet or PC. To improve security, we recommend disabling this item after
configuring connection settings.
Auto Connection
This function is only for iOS devices.
If you are not using iOS devices, please set this Auto Connection function "OFF".
Communication Diagnosis LED
The colors of the printer's LEDs will change according to the Bluetooth communication status.
For details, see the Online hardware manual (Setup – Use App)
.
2) Click [Yes] on the screen asking to confirm application.
To Next Page
Loading...
