Software Manual
48
Cash Drawer 1 Pulse Width
You can choose the length of the open drawer signal that is sent from the printer to Cash Drawer 1.
Value Default Details
Pulse width is set as 0.01 sec.
100 milliseconds Pulse width is set as 0.1 sec.
200 milliseconds * Pulse width is set as 0.2 sec.
300 milliseconds Pulse width is set as 0.3 sec.
400 milliseconds Pulse width is set as 0.4 sec.
500 milliseconds Pulse width is set as 0.5 sec.
600 milliseconds Pulse width is set as 0.6 sec.
700 milliseconds Pulse width is set as 0.7 sec.
800 milliseconds Pulse width is set as 0.8 sec.
900 milliseconds Pulse width is set as 0.9 sec.
1,000 milliseconds Pulse width is set as 1.0 sec.
1,100 milliseconds Pulse width is set as 1.1 sec.
1,200 milliseconds Pulse width is set as 1.2 sec.
Buzzer1 - On Time
If the Peripheral Unit Type is set to Buzzer, this setting selects the beep ON time for the buzzer operating as
peripheral unit 1.
Value Default Details
20 milliseconds * Sound on for 0.02 sec.
40 milliseconds Sound on for 0.04 sec.
100 milliseconds Sound on for 0.1 sec.
200 milliseconds Sound on for 0.2 sec.
500 milliseconds Sound on for 0.5 sec.
1,000 milliseconds Sound on for 1.0 sec.
2,000 milliseconds Sound on for 2.0 sec.
5,000 milliseconds Sound on for 5.0 sec.
To Next Page
Loading...
