Software Manual
49
Buzzer1 - Off Time
If the Peripheral Unit Type is set to Buzzer, this setting selects the beep OFF time for the buzzer operating as
peripheral unit 1.
Value Default Details
20 milliseconds * Silent on for 0.02 sec.
40 milliseconds Silent on for 0.04 sec.
100 milliseconds Silent on for 0.1 sec.
200 milliseconds Silent on for 0.2 sec.
500 milliseconds Silent on for 0.5 sec.
1,000 milliseconds Silent on for 1.0 sec.
2,000 milliseconds Silent on for 2.0 sec.
5,000 milliseconds Silent on for 5.0 sec.
Buzzer1 - Repeat
If the Peripheral Unit Type is set to Buzzer, this setting selects the number of beeps produced by buzzer #1
when it is activated. (Each beep will sound for the specified ON time, followed by silence for the specified
OFF time). Note that you can force the buzzer off at any time by pressing the FEED button.
Value Default Details
1 * 1 beep
2 2 beep
3 3 beep
5 5 beep
10 10 beep
15 15 beep
20 20 beep
To Next Page
Loading...
