Star Micronics TSP100IIIU - Page 50

Software Manual
50
Buzzer2 - On Time
If the Peripheral Unit Type is set to Buzzer, this setting selects the beep ON time for the buzzer operating as
peripheral unit 2.
Value Default Details
20 milliseconds
*
Sound on for 0.02 sec.
40 milliseconds
Sound on for 0.04 sec.
100 milliseconds
Sound on for 0.1 sec.
200 milliseconds
Sound on for 0.2 sec.
500 milliseconds
Sound on for 0.5 sec.
1,000 milliseconds
Sound on for 1.0 sec.
2,000 milliseconds
Sound on for 2.0 sec.
5,000 milliseconds
Sound on for 5.0 sec.
Buzzer2 - Off Time
If the Peripheral Unit Type is set to Buzzer, this setting selects the beep OFF time for the buzzer operating as
peripheral unit 2.
Value Default Details
20 milliseconds
*
Silent for 0.02 sec.
40 milliseconds
Silent for 0.04 sec.
100 milliseconds
Silent for 0.1 sec.
200 milliseconds
Silent for 0.2 sec.
500 milliseconds
Silent for 0.5 sec.
1,000 milliseconds
Silent for 1.0 sec.
2,000 milliseconds
Silent for 2.0 sec.
5,000 milliseconds
Silent for 5.0 sec.