Star Micronics TSP100IIIU - Page 51

Software Manual
51
Buzzer2 - Repeat
If the Peripheral Unit Type is set to Buzzer, this setting selects the number of beeps produced by buzzer #2
when it is activated. (Each beep will sound for the specified ON time, followed by silence for the specified
OFF time). Note that you can force the buzzer off at any time by pressing the [FEED] button.
Value Default Details
1
*
1 beep
2
2 beeps
3
3 beeps
5
5 beeps
10
10 beeps
15
15 beeps
20
20 beeps