Star TSP650 - 5. Consumable Parts and AC Adapter; 5-1. Thermal Paper Roll

– 19 –
5. Consumable Parts and AC Adapter
When consumable parts have run out, use those specied in the table below.
Note:Access the following URL for the information of the recommended paper.
http://www.star-m.jp/eng/dl/dl02.htm
Make sure that the AC adapter specied in the table is used.
Use of consumable parts or AC adapter which are not specied in the table may result in damage
to the printer, re or electric shock.
5-1.ThermalPaperRoll
(1) Paper roll specication
ermal paper
ickness: 65~85 µm (excluding Mitsubishi HiTec F5041)
Width: 79.5±0.5 mm (57.5±0.5 mm when the paper roller holder is used)
Outer roll diameter: ø83 mm or less
Take up paper roll width: 80
+0.5
-1
mm or (58
+0.5
-1
mm when the paper roller holder is used)
Core outer/inner diameter
CoreouterCoreinner
ø18±1 mm ø12±1 mm
Printed surface: Outer edge of roll
Tail end handling: Do not use paste or glue to secure the roll paper or its core.
Do not fold the tail end of the paper.
(2) Recommended paper
Manufacturer
Product
name
Qualitycharacteris-
tics/Use
Paperthick-
ness(µm)
Mitsubishi Paper Mills
Limited
P220AG normal type paper 65 (thickness)
HP220A high image stability paper 65 (thickness)
HP220AB-1 high image stability paper 75 (thickness)
PB670 2 color paper: Red & Black 75 (thickness)
Mitsubishi HiTec Paper
Flensburg GmbH
F5041 normal type paper 60 (thickness)
Oji Paper Co., Ltd. PD150R normal type paper 75 (thickness)
PD160R high image stability paper 65/75 (thickness)
Nippon Paper Industries TF50KS-E2D normal type paper 59 (thickness)
Kanzaki Specialty Papers
Inc. (KSP)
P320RB 2 color paper: Red & Black 65 (thickness)
P320BB 2 color paper: Blue & Black 65 (thickness
P300/P310 *1 normal type paper 57/58 (thickness)
*1 P300/P310 papers cannot be used vertically.