StarLine A93, StarLine A63
102
Note:
1) the presence of a remote control in the transceiver range
during the auto engine start is not required;
2) actual engine start time may vary with programmed value
within 3 minutes;
3) alarm clock engine start is switched on for one start-up
cycle. For a new start-up, you need to activate (turn on)
correspondin icon on LCD;
4) if the function 2 (Table №2 page 113) is set to «No time
limit», then for any automatic engine start warming time is
limited to 30 min;
5) if function 4 (Table №2) is set to 2, 3 or 4, the engine
warm-up will be automatically stopped when engine
temperature exceed +50 ° C;
6) the auto temperature engine start can be turned ON
regardless of the state of functions alarm clock or timer
periodical engine starts.
To Next Page
Loading...
