EasyManua.ls Logo

Sterling 360 - Maintenance Schedule

Sterling 360
213 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14-2 Maintenance schedule
Performing regular maintenance on your Sterling 360 vehicle will help ensure that it delivers safe, reliable
service and optimum performance for years to come.
Failure to follow a regular maintenance program can result in inefficient operation and unscheduled down-
time.
This manual describes simple maintenance checks and procedures that can be carried out by the owner.
These procedures are cross-referenced in the maintenance schedule. For other procedures, please bring the
vehicle to an authorized Sterling service facility, or see the Sterling 360 Service Manual.
1 Maintenance schedule
For replacement intervals for lubricants and other fluids, see under the heading “Lubrication schedule.”
: Exhaust emission items.
: Noise control items.
Operation/
description
Time of inspection and maintenance
Remarks
Ref.
page
Pretrip inspection
Initial Maintenance
at 2500 miles/4 000 km
Inspection interval
Every 6000 miles/
10 000 km
Every 12,000 miles/
20 000 km
Every 18,000 miles/
30 000 km
Every 24,000 miles/
40 000 km
Every 30,000 miles/
50 000 km
Every 54,000 miles/
90 000 km
Every 150,000 miles/
250 000 km
ENGINE
Coolant, fuel, and
oil leak checking
×
Check beneath the vehicle
for signs of leakage.
11-8
Engine
condition checking
×
Check that the engine starts
smoothly and runs quietly.
11-9
Manifold fastener
torque checking
×
Check intake and exhaust
manifold fastener torques.
13-4
Valve lash
checking and
adjusting
××
Check valve lash with a
feeler gauge (procedure in
service manual).
13-4
Engine oil filter
replacing
×
Every 6000 miles/10 000 km or
12 months
Replace the filter element. 11-28
Fuel filter
replacing
Every 12,000 miles/20 000 km or
12 months
Replace the filter element. 11-29
Fuel system
checking
Every 12,000 miles/20 000 km or
12 months
Check the fuel tank, cap,
and lines for leakage.
11-32
Engine drive
belt inspection
×
Every 6000 miles/10 000 km or
12 months
Visually inspect the belt.
Check belt tension.
11-39
Cooling system
inspection/Charge
air cooler and radi-
ator cleaning
×
Inspect the radiator, radiator
mounts, pressure cap, and
coolant hoses.
Remove dust and deposits
from the radiator and
charge air cooler.
11-37
Coolant level
checking
×
Check the coolant level and
add coolant if necessary.
11-35
Coolant changing Every 24 months Replace the coolant. 11-37
Turbocharger
checking
×
Check the turbocharger
rotor play (procedure in ser-
vice manual).

Table of Contents