9-2 Interior equipment and accessories
The cigarette lighter can be used when the ignition
switch is in the “ON” or “ACC” position.
Push the cigarette lighter all the way in. Within 30
seconds, it will pop back to its original position with
its core red hot. Pull it out of its socket to use it.
If the lighter remains in its socket for more than 30
seconds, pull it out by hand. Have the lighter
inspected by an authorized Sterling service facility.
Do not use a cigarette lighter if the case is deformed
or misshapen. A deformed lighter will not pop out
properly. Be sure to use genuine lighters or equiva-
lents as replacements.
Do not plug a cigarette lighter from another vehicle
into your vehicle’s socket. Your vehicle’s cigarette
lighter is designed for a 12 V power supply. Do not
use a 24 V cigarette lighter.
Cigarette lighter
WARNING
• Do not allow a child to touch the cigarette
lighter. This could cause a burn injury.
• Do not touch the metallic parts of the ciga-
rette lighter. This could cause a burn
injury.
• Do not hold the cigarette lighter in the
pushed-in position, or allow it to remain
pushed in, since the wiring could burn out
and start a fire.
• Do not exit your vehicle with the cigarette
lighter pushed in. Doing so could result in
a fire.
• Do not use electrical devices designed to
be plugged into the cigarette lighter
socket. This could overload the circuitry,
overheat the wiring, and cause a fire.
A fire can cause burn injuries and loss of life.
Z14918
To Next Page
Loading...