Stihl GS 461 - Page 18

17GS 461
: Unscrew the clutch (1) at
hexagon (arrow)
The clutch has a left-hand thread.
Disassembly
: Use hook (2) 5910 890 2800 to
remove the clutch springs (1)
If there are distinct signs of wear of
the clutch kit (set of 3), replace
clutch shoes.
Assembly
: Fit holder (1) and slide clutch
shoes (2) over the legs (3)
TOP
1
2411RA003 TG
off
off
off
5902RA006 TG
21
off
3443RA464 TG
3
1
2
Attach the springs to the side with
the raised hexagon (arrow).
– clamp assembled clutch on a
horizontal clutch shoe in the vise
: Attach one end of the clutch
spring (1) to the clutch shoes
: Use the assembly hook (2)
5910 890 2800 to pull the other
end of the spring and hook it into
the clutch shoe
– Examine the clutch – all springs
must be hooked in properly
The washer (1) must be in place
and the word "TOP" (arrow) must be
visible.
off
off
5902RA012 TG
1
2
TOP
1
2411RA004 TG
: Fit the clutch (1) on the
crankshaft stub so that the raised
hexagon (arrow) can be seen
: Screw on and tighten the
clutch (1) – left-handed thread
– Pull the locking strip out of the
cylinder
– Fit rim sprocket and clutch drum
– Fit the spark plug and tighten it
down firmly
– Refit the spark plug boot
– Insert air baffle
– Attach filter cover
TOP
1
2411RA005 TG