Stihl GS 461

66 GS 461
: Push baffle (1) with bushing (2)
and throttle rod (3) over the studs
and position
: Hook throttle rod (1) clockwise
into the lever (arrow) of the
throttle shaft
2411RA122 TG
1
2
3
1
3443RA404 TG
: Push the bushing (1) into the
mount (arrow) and position
– Open the throttle wide and hold,
then hook throttle rod into throttle
trigger – throttle trigger must only
turn if the trigger interlock is
pressed
– Check correct functioning
– Press throttle trigger down
completely, the lever on the
carburetor must be at full throttle
and must not move any further in
open direction
– Reassemble remaining parts in
reverse order
2411RA122 TG
1