Driving
A long, robust and ergonomic tiller arm allows
the operator to drive the truck easily.
The tiller is used to carry out the following con-
trols:
●
Steering
●
Drive control throttles
●
Horn
●
Fork lifting and lowering buttons
●
Anti-crush safety button
●
Truck braking when the tiller arm reaches
the upper end position and lower end posi-
tion.
For safety reasons, when the tiller arm is re-
leased a gas spring automatically returns it to
the initial position.
Braking system
Braking:
●
counter-current, upon accelerator release,
●
counter-current by switching the drive direc-
tion,
●
counter-current, controlled by the anti-crush
safety button
●
Electromagnetic safety, controlled by the
emergency stop handle
●
safety electromagnetic, controlled by the re-
lease of the tiller.
●
safety electromagnetic, controlled when the
tiller arm reaches the lower end position
●
Electromagnetic parking, applied when
power supply is cut off.
On-board equipment
The on-board equipment includes:
●
an office compartment for storing rolls of
film and adhesive, gloves, pens etc.
●
a removable clipboard for attaching lists
and documents in A4 format
●
Emergency stop button located on the
chassis
●
an hour meter/discharge indicator.
Overview
3
Technical description
2745728043478 EN - 11/2021 - 09
To Next Page
Loading...
