Braking using the tiller
Braking using the tiller can be performed in
the following ways:
●
During travel, push the tiller to the upper
end position. The truck will decelerate very
sharply to a stop.
●
During travel, push the tiller to the lower
end position. The truck will decelerate very
sharply to a stop.
●
During travel, release the tiller. The tiller will
automatically return to the upper end posi-
tion. The truck will decelerate very sharply
to a stop.
WARNING
The condition of the floor surface considerably af-
fects the braking distance of the truck.
The operator must consider this factor while driving.
Parking brake
●
When the traction control throttle is re-
leased, the truck stops using the electro-
magnetic brake when its speed approaches
0 km/h or when the tiller returns to the verti-
cal position
Use
4
Driving
78 45728043478 EN - 11/2021 - 09
To Next Page
Loading...
