EasyManua.ls Logo

Stoll CMS 933 - Safety Instructions for the Electrical Connection; Safety Instructions for the Exchange of Data; Safety Precautions for Production

Stoll CMS 933
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 Safety instructions
1.6 Safety instructions for the individual Operation Phases
1-12
1.6.3 Safety instructions for the electrical connection
Type of risks Measures
Danger to life during work on the
electrical assemblies of the machine.
Get the machine connected by an
electrician.
Note technical data.
1.6.4 Safety instructions for the exchange of data
Type of risks Measures
Computer viruses!
Loss of data or production.
Computer viruses can creep into the
machine through unscanned data via
USB port or network.
Bring in only virus free data on to the
knitting machine.
The dangers associated with computer
viruses have been increasing for years.
Look into the subject and ensure that
the network computer connected with
the knitting machine and the data
carrier used on the knitting machine are
free from computer viruses!
We advise you with emphasis to the
fact that the company Fa. H. Stoll
GmbH & Co. KG will take no guarantee
or responsability for damages in this
conjunction. For further enquiries
please contact Stoll-Helpline.
1.6.5 Safety precautions for production
Type of risks Measures
Danger of injury Close the cover hoods.
Close the rear panels of the machine.
Close the cover hoods.
Keep eyes away from the lateral slack tensioner.
Objects such as tools, yarn bobbins etc. to be
removed from the inside of the machine.
If the machine is in operation, under no
circumstances should you reach into it.
Stop the machine if an intervention is necessary.
Danger of winding and
suction and danger of
crushing.
Do not reach into the fabric take-down rollers.
Do not touch the friction feed wheel while the
machine is in operation and keep away loose
garments and hair strands.
Wait for the feed wheel to stop moving after
stopping the machine.

Table of Contents

Related product manuals