Stoll CMS 933 - Organizational Measures

1 Safety instructions
1.2 Organizational measures
1-2
1.2 Organizational measures
 The instruction manual is to be made accessible to all personnel who
are responsible for working on the knitting machine.
 The operator must ensure that the contents of the instruction leaflet
are clearly understood and can be applied by the personnel who are
responsible for working on the machine.
 Apart from this the operator must ensure that the national/domestic
regulations are observed and followed. They are
for. e.g.. Regulations.
- for prevention of accidents
- for protection of health,
- for environmental protection,
- for technical rules and
- for a safe and proper working.
 The knitting machine is to be used only in a technically sound
condition and as per the stipulated conditions, awareness about the
safety and dangers should be there and the operating instructions
must be followed.
 The warnings on the machine are to be maintained in a complete and
legible condition.
Procurement of spare parts See spare parts catalogue
 No modifications, additions or conversions may be made on the
machine that might endanger the safety.
 Use only the original Stoll spare parts during repairs and maintenance.
 No arbitrary changes are to be made in the program in the operating
system of the computer, the machine software and the controlling
system/controls.
 No foreign software is to be installed in the machine.