Electrical data of the machine 2
Storage conditions 2.6
2-5
2.6 Storage conditions
If the knittng machine is to be stored for a longer period of time the
following tasks must be carried out:
1. Clean the knitting machine thoroughly.
2. Lubricate knitting machine.
3. When the knitting machine is transported to another place, the
transport locks must be applied.
4. All bare metals must be sprayed with an anti-corrosion
material.(for. e.g.. WD-40).
5. Cover the area yarn carrier rods -needle beds with gas paper/anti-rust
paper.
6. Cover the knitting machine with a protective foil.
7. Store the knitting machine in a dry place within a building.
Storage temperature -15 °C to +60 °C.
Protect the machine carefully from corrosion especially against sea air.
2.7 Noise emissions
The measurings have been performed on a representative basis for the
series CMS 3xx TC on a CMS 340 TC E8. The machines of the CMS 3xx
TC series emit a sound pressure level which is no higher than the
specified values under comparable conditions.
Applied standards:
ISO/CD 9902 "Textile machine Regulations for Noise Emissions"
ISO/CD 9902-1 and ISO/CD 9902-6.
Level specifications
in dB(A)
Mean sound
pressure level LpA
Uncertainty KpA Mean sound output
level LWA
Uncertainty
KWA
CMS 340 TC 75,8 3,5 92 3,5
Tab. 2-5 Noise emissions
To Next Page
Loading...
