Stoll CMS 933 - Gauge Ranges; Operating Conditions

2 Electrical data of the machine
2.4 Gauge ranges
2-4
2.4 Gauge ranges
Needle number Gauge
Nominal width:
50" (127 cm)
Nominal width:
72" (183 cm)
Nominal width:
84" (213 cm)
Nominal width:
96" (244 cm)
E 3 149
E 3.5 174
E 4 199
E 5 (E 2,5.2) 249 359 419 479
E 7 (E 3.5.2) 349 503 587 671
E 8 399 575 671 767
E 10 (E 5.2) 499 719 839 959
E 12 (E 6.2) 599 863 1007 1151
E 14 (E 7.2) 699 1007 1175 1343
E 16 (E 8.2) 799 1151 1343 1535
E 18 (E 9.2) 899 1295 1727
Tab. 2-4 Number of needles per needle bed
You can adapt the machine to another gauge (not for CMS 420 E). Please
demand our offer.
2.5 Operating conditions
 Set the machine on a level, firm surface in a building
 Do not set the machine in an area endangered by explosions or
underground
 Ambient temperature 59 °F to 113 °F (+15 °C to +45 °C)
 Relative humidity:
- min. 50 %
- max. 80 %
- not kondensed
When yarns are being processed, electrostatic charges can be produced
if the relative humidity is not at least 50 %
In the case of deviating opearting conditions please contact STOLL-
Helpline.