1 Safety instructions
1.6 Safety instructions for the individual Operation Phases
1-14
1.6.7 Safety Instructions for the lubrication, cleaning and
maintenance
Type of risks Measures
Danger of crushing and cutting by the
carriages, racking, the needle beds, the
clamping and cutting devices.
Switch off machine at main switch.
Secure the machine against being
switched on again.
After working on the rear of the
machine, re-fix the rear panels again.
Health hazard When working with oil and grease,
pay attention to the safety regulations
(safety data sheets) applicable to the
respective product!
Pay attention to the Manufacturers'
instructions.
Environment Pollution Ensure that oil and grease is correctly
disposed of in an environmentally
responsible manner!
Observe the country-specific laws and
regulations.
Pay attention to the Manufacturers'
instructions.
1.6.8 Safety instructions for dismantling work
Dismantling for a longer storage or for evacuation:
Type of risks Measures
Danger to life because of electrical
shock
during work on the electrical
assemblies of the machine.
Get the machine disconnected from the
mains supply by an electrician.
Danger of damage to the machine
during transport.
Observe all technical data of the
machine.
Country-specific regulations for the
prevention of industrial accidents for
the transport of heavy loads are to be
observed.
Dismantling and scrapping:
Type of risks Measures
during work on the electrical
assemblies of the machine.
Get the machine disconnected from the
mains supply by an electrician.
Environment pollution during disposal Observe the country-specific laws and
regulations.
To Next Page
Loading...
