PC Camera E - 25
Windows 10
Windows 10
PC Camera
Use the Fn + F10 key combination
or
Control Center button
to toggle power to the PC Camera module.
When
the PC Camera is in use the LED indicator to the left of the camera will be illuminated.
Note that you need to use the Camera app in Windows to take pictures and capture video.
1. Make sure the PC Camera is turned on by using the Fn + F10 key combination (or Control Center button).
2. Run the Camera app from the Start menu by clicking on the Camera app icon (you can type “camera” into
the search box to find the Camera app if it is not pinned to the Start menu).
3. Click to select either photo or video modes.
4. Click the photo icon to take a picture, and the camera icon will briefly turn yellow as the picture is taken.
5. Click on the video icon to start video capture (if video capture begins a timer will appear at the bottom of the
screen and the icon will turn yellow).
6. To stop video capture click the video icon again.
7. Captured photos and videos will be saved to a Camera Roll folder within the Pictures/Videos folder in This
PC, and to the Photos app stored in the Start menu (type Photos into the search box if you cannot find the
app).
To Next Page
Loading...