E - 26 3G/4G Module
Windows 10
Windows 10
3G/4G Module
If you have included an optional UMTS/HSPA+ based 3G Module (Universal Mobile Telecommunications
System
or High Speed Packet Access) module or LTE (Long Term Evolution) 4G module (see “Communica-
tion” on page D - 3 for specification details) in your purchase option, you do not require a driver/application
installation for Windows 10. See “3G/4G Module USIM Card Installation” on page 6 - 22 for instructions on
installing the USIM card (which will be provided by your service provider). See overleaf for connection infor-
mation.
Important Notice
If your purchase option includes both Wireless LAN and 3G/4G modules, then the appropriate antennas will be installed. Note
that In order to comply with FCC RF exposure compliance requirements, the antenna must not be co-located or operate in
conjunction with any other antenna or transmitter.
Important Notice - 3G/4G & Bluetooth/Wireless LAN Modules
In order to comply with FCC regulations you should NOT operate the 3G/4G module and the Bluetooth/Wireless LAN mod-
ules at the same time as this may disrupt radio frequency, and cause interference. When the 3G/4G module is powered on,
make sure that the Bluetooth/Wireless LAN modules are powered off.
To Next Page
Loading...