139
SOFTWARE VERSION
Version information for the software used to control the printer (Controller Software) can be accessed via the
Maintenance page:
1. To access the Maintenance page, press the Maintenance button within the Tools page (see
“Working with the Tools Page” on page 76).
2. Locate the Update Software row within the page (see “Maintenance” on page 91).
3. The printer’s Controller Software version information is displayed within the Update Software
row.
Figure 5-29: Controller Software Version Information
Note: Controller Software is installed on a flash device located on the Controller
board and should not be confused with GrabCAD Print software, which is
installed on the workstation PC.
To Next Page
Loading...
