14
Step 3: Optional connections
Dolby Digital
Dolby digital bitstream audio S/PDIF can be achieved using an optical cable. (This cable is not
supplied.) The cable should be connected between socket 5 on the
and the S/PDIF
socket on your Dolby Digital decoder amplifier.
Looping Out (for VCR recording)
In order to watch one channel while recording another on a VCR, connect an RF cable (not
supplied) between the LOOP OUT socket on the
(socket 2) and the RF IN socket on your
VCR. Note that VCR recordings are only analogue, not digital.
To Next Page
Loading...
