Strong SRT 5405 - Multi-Language and Dolby Digital Broadcasting

27
Multi-language and Dolby Digital broadcasting
If a channel is being broadcast in more than one audio language, you can choose which
language to listen to. Similarly, if a channel is being broadcast in more than one audio format, you
can choose which format to listen to.
1. Press the AUDIO button (the green button) on the remote control. The Audio setting window
appears.
2. If more than one audio language or format is being broadcast, pressing
VOL
e
or
VOL
f
will cycle
through each language and format. Choose a language and format and press
CHd.
If a channel is being broadcast in Dolby Digital, the language will be shown with an AC3 suffix,
as in English (AC3). Non-Dolby broadcasts will have an MP2 suffix, as in English (MP2).
3. You can also select the output mode for the audio language: stereo, left speaker or right
speaker. With the Channel option highlighted, press
VOL
e
or
VOL
f
until the output mode you
want is highlighted.
4. Press OK or EXIT to close the Audio setting window and return to normal viewing.