30
With this menu you can control the following settings:
• Language for the on-screen menus
• Level of parental guidance (All, R and
above, AV and above, MA and above, M
and above, PG and above and G above)
• Time zone
• Transparency (that is, how much
of the picture is visible through
an information panel)
Note that the level of parental guidance (as determined by the PG block level setting) is
controlled by a password. For example, if you have MA and above, then any program with a
classification of MA or higher will be blocked unless the unit’s password is entered.
The default password is 0000. You can change the password. See the next section for
instructions.
4. Select an option you want to change. If necessary, press
CHd or CH
c
until the option is
highlighted.
5. With the option you want to change highlighted, press
VOL
e
or
VOL
f
to step through the
allowable values (shown in the panel at the right of the screen). Stop when the value you want
is displayed.
6. If there is another option you want to change, repeat this procedure from step 4.
7. When you have finished, press OK.
8. A message appears asking you to confirm that you want to save the changes. To proceed,
press OK. To cancel, press MENU or EXIT.
9. Press EXIT until you return to normal viewing.
To Next Page
Loading...
