www.stryker.com 72-0908E OM FL28C REV C 35
Return To Table of Contents
Emergency Crank Handle - FOHMAU
The emergency crank is used to adjust the position of the mobile sections of the bed during a power failure.
OPERATION
WARNING
Before using the emergency crank during a power failure, always unplug the unit. An unexpected return of power could
rotate the handle and cause injury.
Note:
• Exert pressure on the crank while turning to compress the adaptor spring.
• Only the Fowler and Gatch positions can be adjusted during a power failure.
1. Insert the crank into the appropriate aperture located at the foot end of the bed and follow the icon indications to
adjust as desired.
2. Remove the cranks after use and store it at the head end of the bed.
To Next Page
Loading...
