42 72-0908E OM FL28C REV B www.stryker.com
Return To Table of Contents
Removable I.V. Pole, 1” - FA61002-G
The removable I.V. pole FA61002 is a 1” diameter I.V. pole with and adjustable height. The base of the pole is equipped
with a lock pin to prevent the pole from rotating when installed in a socket.
WARNING
The scale and bed exit systems must be adjusted if this accessory is added when either system is in operation. Refer to
the “Add / Remove Equipment” procedure (page 22).
INSTALLATION
Tools Required:
• None
Procedure:
1. Insert the I.V. pole into one of the sockets located on the four corners of the bed.
2. Rotate the pole to until the lock pin engages in the socket.
OPERATION
CAUTION
Do not use the I.V. pole as a push/pull device.
1. To adjust the height of the pole:
• Turn the locking sleeve counterclockwise and raise the telescoping
portion of the pole to the desired height.
• Tighten the locking sleeve.
2. Hang the I.V. bags.
WARNING
The weight of the I.V. bags must not exceed 11 lb (5 kg) per hook.
Tightening Sleeve