6
ENV Mode Requirements
The equipment listed below is required to achieve the intended results when
using the light source in Endoscopic Near-Infrared Visualization (ENV) mode.
Any model listed for the camera head and laparoscope may be used. Intended
results will not be achieved if any equipment is substituted.
ENV mode is intended to be used with a contrast agent drug called
indocyanine green (ICG). AIM IC-GREEN® (NDC # 17478-801-02) includes the
required ICG supplies. See the Using AIM IC-GREEN in ENV Mode section for
more detail.
Note: In the United States, the L10 LED Light Source with AIM Technology
and SafeLight Fiber Optic Cable are indicated for use only with AIM IC-GREEN.
For users outside the U.S., refer to Stryker user manual P27009.
Before using ENV mode, read and be familiar with the warnings and
instructions provided with each device in the system.
Light Source
0220-220-300 L10 LED Light Source with AIM Technology
Camera Control Unit
1588-010-000 1588 AIM Camera Control Unit
1
Camera Head
1588-210-105 1588 AIM Camera Head, C-Mount
1
1588-610-122 1588 AIM Camera Head
with Integrated Coupler
1
1588-710-105 1588 AIM Inline Camera Head, C-Mount
1
Coupler
1588-020-122 AIM Coupler, 18mm, C-Mount
2
Laparoscope
0502-537-010 AIM, 5.4mm, 0°, HD Laparoscope, 30cm
3
0502-537-030 AIM, 5.4mm, 30°, HD Laparoscope, 30cm
3
0502-937-010 AIM, 10mm, 0°, HD Laparoscope, 33cm
3
0502-937-030 AIM, 10mm, 30°, HD Laparoscope, 33cm
3
AIM SafeLight Cable
0233-050-300 AIM SafeLight Fiber Optic Cable, 5.0mm x 10ft (3.05m)
4
Indocyanine Green
AIM IC-GREEN
5
1
See Stryker user manual P29923 (English) or P29924 (multilingual).
2
See Stryker user manual
P30104 .
3
See Stryker user manual P27900.
4
See Stryker user manual P27701.
5
See AIM IC-GREEN instructions for use packaged with NDC # 17478-801-02.
To Next Page
Loading...
Need help?
General
