Stryker L10 User Manual

12
Connecting the AC Power Cable
1. Plug in the AC power cord to the AC Inlet on the rear console panel.
2. Plug in the other end of the AC cord to a hospital-grade outlet.
Connecting to the Camera Control Unit
To activate ENV mode, the L10 AIM Light Source must be connected to
the 1588AIM Camera. White Light mode and IRIS mode do not require
connection to the camera.
Note: The 1588AIM camera head can be programmed to control some
functions of the L10 AIM Light Source, such as toggling Active/Standby or
adjusting some settings in ENV mode. Contact a Stryker representative for
more information about enabling this advanced feature.
1. Using a USB A-to-A cable, connect the CCU port on the L10 AIM Light
Source to the Light Source port on the 1588AIM Camera Control Unit.
SDC CCU
1588 AIM Camera Control Unit
L10 AIM Light Source

Stryker L10 Specifications

General

Brand	Stryker
Model	L10
Category	Medical Equipment
Language	English