40
Guidance and Manufacturer’s Declaration: Electromagnetic Immunity
L10 AIM Light Source is intended for use in the electromagnetic environment specied below.
The customer or the user of L10 AIM Light Source should ensure that it is used in such an
environment.
(a) Field strengths from xed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast, and TV broadcast,
cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to
xed RF transmitters, an electromagnetic site survey should be considered. If the measured eld
strength in the location in which the L10 AIM Light Source system is used exceeds the applicable
RF compliance level above, the L10 AIM Light Source system should be observed to verify normal
operation. If abnormal performance is observed, additional measures may be necessary, such as
reorienting or relocating the L10 AIM Light Source unit.
(b) Over the frequency range 150 kHz to 80 MHz, eld strengths should be less than 3 V/m.
To Next Page
Loading...
