pg 17
Freeze or Infinite Mode Switch Setup - continued
OR
6 For Freeze Mode: Play a note or chord, then press and hold the
footswitch to capture and sustain the reverb applied to your signal
indefinitely while holding the external footswitch� As you play new
notes/chords while still holding the external footswitch, you’ll hear
them on top of your “frozen” signal without being added to the reverb�
Release the external footswitch to disengage Freeze mode�
For Infinite Mode:
Press and hold the footswitch to hear reverb
applied indefinitely to all input signals while holding the external
footswitch� Release the external footswitch to disengage Infinite mode�
To Next Page
Loading...
