EasyManua.ls Logo

Subaru 602 - Page 40

Subaru 602
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
June 2013
Electrical Systems Operation & Diagnosis Module (602)
Note: Pressing the Engine Start and Stop button while the starter is operating will
turn off the starter.
Remote Transmitter Position for Dead Transmitter Battery
5. A dead battery in the remote transmitter will prevent normal starting of the engine. In this
condition, hold the remote key to the chrome ring of the Engine Start and Stop button and
push the Engine Start and Stop button once while holding the brake pedal. The starter will
engage and operates until the engine starts or for 10 seconds.
6. The engine and ignition are turned off by pressing the Engine Start and Stop button once.
7. The starter can be engaged without pressing on the brake pedal by performing the following:
Turn the Accessory position on and press the Engine Start and Stop Button a second time
but do not release the button. Holding the button in this condition for 20 seconds will engage
the starter until the engine starts or for 10 seconds (BRZ, Legacy and Outback).
Note: If the vehicle is moving, the engine and ignition will turn off if the Engine Start
and Stop Button is pressed for 3 seconds. Restart is accomplished by shifting
to neutral, lightly pressing the brake pedal and pushing the Engine Start and
Stop button once.
NOTES:
46

Table of Contents

Related product manuals