Sumitomo Drive Technologies Cyclo 6000 - Important Notes; Disposal; 1. Inspection Upon Delivery; 1.1 Reading the Nameplates

1. Inspection Upon Delivery
IMPORTANT NOTES 1.INSPECTION UPON DELIVERY
•
Operate the unit only within its design and performance specications; otherwise, injury or damage to
the system may occur.
•
Keep hands and all foreign objects from the internal moving parts of the unit; otherwise, injury or
damage to the system may occur.
•
Take damaged units o-line immediately and do not resume operation until properly repaired.
•
Modications or alterations of any kind to the unit will void the warranty and all subsequent claims.
•
Do not remove the rating plate.
•
In order to avoid injury, ensure that the unit is in a stable position before unpacking.
•
Verify that the unit received matches your order. Using the incorrect product may cause equipment
damage or personal injury.
•
Do not remove the nameplate from the unit.
Disposal
1.1 Reading the Nameplates
Metal Reducer Nameplate
Metal Gearmotor Nameplate
Non-Metallic Nameplate
(when Cyclo® input is 613 or larger)
Please refer to local, state, and federal regulations governing disposal of:
When contacting Sumitomo about this product, please be prepared to provide the following information
from the nameplate:
Upon receipt of the reducer/gearmotor, verify that:
Please consult your Sumitomo agent, distributor, or sales oce if you nd any defects or if you have any questions.
Upon delivery, inspect the unit for damage that may have occurred during shipment. Notify the shipping company
immediately if you nd any damage. Do not install or operate a damaged unit.
Steel Scrap:
Lubricants:
•
Housing (Ductile and Gray Cast Iron)
•
Gears
•
Shafts
•
Bearings
•
The model number on the unit nameplate matches the purchase order.
•
The unit was not damaged during shipping.
•
All bolts and nuts are fully tightened.
•
Serial Number.
•
Model Number.
•
Ratio
•
Gear Oil
•
Grease
Nominal
Reduction
Ratio
Unit Model
Number
Unit Serial
Number
Nominal
Reduction
Ratio
Unit Serial
Number
Unit Model
Number
Nominal
Reduction
Ratio
Unit Serial
Number
Unit Model
Number
Unit Serial
Number
Unit Model
Number
Nominal
Reduction
Ratio
www.SumitomoDrive.com
Cyclo® 6000 Operating and Maintenance Manual
Cyclo® 6000 Cyclo® 6000
Cyclo® 6000 Operating and Maintenance Manual
2 3