Name: Sumitomo Bevel Buddybox 4
Brand: Sumitomo
Rating: 5 (1 reviews)

To Next Page

To Previous Page

CycloPortionDisassembly/Assembly,continued

Reassembly Procedure

54 Manual BBB4_ENG_01_2016_991301

Code on

upper disc

Code on

lower disc

180

Insert the top Cycloid disc so that the code engraved on its surface is 180° opposed

to the corresponding etched code on the lower Cycloid disc.

IftheCycloportionoftheBBB4unitisgreaselubricated,rellthereduction

components with the amount speciﬁed in Grease Quantities section of this manual;

or, ﬁll to 80% of the space around the reduction mechanism and bearings of single

reductionunits,and50%ofthespacearoundthereductionmechanismofboththe

ﬁrst and second stage of double reduction units.

If the Cyclo portion of the BBB4 unit is oil lubricated – do not add

anygreaseduringthereassemblyprocess.

WhenreassemblingtheBBB4gearhousingontotheCycloreductionstage,ensure

that the carrier pins are inserted and aligned with the corresponding bores of the

rollers.

Questions and Answers:

Need help?

Do you have a question about the Sumitomo Bevel Buddybox 4 and is the answer not in the manual?

Sumitomo Bevel Buddybox 4 Specifications

General