Cyclo® HBB
2 Operation & Maintenance Manual
Cyclo® HBB
Safety Symbols
These safety symbols appear throughout this manual to indicate
important warnings:
DANGER: Incorrect handling of the unit and/or
failure to follow the instructions may cause physical
damage, serious personnel injury, and/or death.
CAUTION: Incorrect handling of the unit and/or
failure to follow the instructions may cause physical
damage and/or personnel injury.
Safety Precautions
Review and adhere to the instructions in this manual to ensure:
• trouble-freeCyclo®HBBoperation
• yourrightstomakeawarrantyclaim.
Read this manual and all accompanying documents thoroughly
before use. Understand the machine, information on safety, and
all precautions for correct operation. Sumitomo recommends
that this manual is easily accessible for reference at the machine
location.
• Only properly trained personnel should
transport, install, align, wire, inspect, operate, and
maintain the unit.
• Theusershouldinstallsecondarysafetydevicesfor
applications involving passenger transportation.
Failure to do so may result in personnel injury,
death, and/or equipment damage.
• Theusershouldinstallsecondarysafetydevicesfor
applications involving elevators. Failure to do so
may result in personnel injury, death, and/or
equipment damage.
Disposal
Please refer to local, state, and federal regulations governing
disposal of:
Steel Scrap:
• Housing(GrayCastIron)
• Gears
• Shafts
• Bearings
Lubricants:
• GearOil
• Grease
Important Notes