Sumitomo Cyclo Helical Buddybox User Manual

38 Operation & Maintenance Manual
Cyclo® HBB
Cyclo® HBB
5
Place the gland cover into the screw conveyor adapter and secure it in place with
the supplied hardware.
6
Carefully slide the screw conveyor adapter over the shaft and position it against the
corresponding threaded holes in the Cyclo® HBB housing. Use the included hardware
to secure the adapter to the housing.
7
Carefully insert the application-appropriate sealing material into the bore of the
screw conveyor adapter.
•Tosealtheoutputportionofthescrew conveyor adapter, Sumitomo Drive
Technologiesprovidestwodierentoptionsforeachscrewconveyorkit:
− High-Performance Braided Cord: recommended for use if the conveyed
material is abrasive.
− Double-Lip, Nitrile Oil Seal: recommended for use if conveyed material is
a nonabrasive liquid.
•Sumitomodoes not recommend the use of both sealing options at the same.
8
Carefully slide the cover plate over the screw conveyor shaft and place it against the
screw conveyor adapter. Secure the cover plate using the supplied hardware.
Cyclo® HBB Screw Conveyor Option
Assembly Instructions

Sumitomo Cyclo Helical Buddybox Specifications

General

Brand	Sumitomo
Model	Cyclo Helical Buddybox
Category	Engine
Language	English