Sumitomo Cyclo Helical Buddybox User Manual

44 Operation & Maintenance Manual
Cyclo® HBB
Cyclo® HBB
3
When reinserting the eccentric bearing assembly, use only a wooden or
hardrubber mallet to tap it into place.
4
Insert the top Cycloid disc so that the code engraved on its surface is 180° opposed
to the corresponding etched code on the lower Cycloid disc.
5
If the Cyclo® portion of the HBB unit is grease lubricated, refill the reduction
components with the amount specified in Grease Quantities section of this manual;
or, fill to 33%-50% of the space around the reduction mechanism and bearings of
single reduction units, and 33%-50% of the space around the reduction mechanism
of both the first and second stage of double reduction units.
If the Cyclo® portion of the HBB unit is oil lubricated – do not add any grease
during the reassembly process.
6
When reassembling the HBB gear housing onto the Cyclo® reduction stage, ensure
that the carrier pins are inserted and aligned with the corresponding bores of the
rollers.
Cyclo® Portion Disassembly/Assembly
Cyclo® Reassembly Procedure
Eccentric
Bearing
Code on
upper disc
Code on
lower disc
X
X
180
º

Sumitomo Cyclo Helical Buddybox Specifications

General

Brand	Sumitomo
Model	Cyclo Helical Buddybox
Category	Engine
Language	English