8-4
8. Administrator mode｜Lock functions
8. Administrator mode
If you enable “Cycle” option, a
startup password is requested every
certain period of time (every
day/every week/every month/every
time) after the date when the startup
password is activated passed.
Security setting is enabled
Change a startup password
Change a date when the
splicer requires a password
entry.
You cannot start the splicer if you’ve forgot the startup password. It should
be taken notes of.
Please contact our maintenance service center if you’ve forgot it.
Cycle settin
Security Settin
s screen
To Next Page
Loading...
