Sumitomo Z2C - Drop Cable Splicing

2-23
2. Basic splicing operation｜Drop cable splicing
2. Basic splicing operation
●
Applicable cable
●
Required items
Clean the cable sheath thoroughly to remove cable gel or other stains.
▪ Fusion splicer (Z2C)
▪ Nippers
▪ Jacket remover
▪ Fiber cleaver
1. Separate the steel wire from
the cable using nippers.
2. Cut the steel wire to a desired
length.
3. Insert a protection sleeve
over the cable.
▪ Tight buffer type single fiber drop cable.
❚
Drop cable splicing
●
Removing cable sheath